Skip to main content
x
Type a word
Category of Technology / Product

ID : tm3295313924


WIMO : Wireless power systetoward a sustainable mobility in smart cities

A wireless power transfer system consists of two main subsystems. The first one is the receiving and transmitting antenna, which functions to transfer and capture RF energy to power up the devices. The second subsystems is the rectification circuitry, which converts the received RF power into DC.

Bandar Baru Bangi Selangor

ID : tm3295413925


Split (Stormwater particle & litter interceptor tank)

The split (stormwater particle & little interceptor tank) system has a circular aluminium "swirl chamber" to induce a swirling flow pattern that will accumulate settleable solids and prevent re-suspension through bottom grid structure and able to remove 80% of total particles (down to 50 micron size)

Bandar Baru Bangi Selangor

ID : tm3295513926


Personality, Emotional Intelligence and Learning Style Dashboard 2.0 (Peils Dashboard 2.0)

Peils Dashboard 2.0 allows trainer to identify trainee's personality, emotional intelligence level and learning style via an integrated displays. It helps trainer to choose the right teaching-learning methodologies that suit to individual needs, hence increases the effectiveness of training.

Bandar Baru Bangi Selangor

ID : tm3295613927


One Environmental, Social and Governance Index (1ESG)

One Environmental, Social and Governance Index (1ESG) is an index that provides detailed guidelines on the information needed to be disclosed by companies in Malaysia, considering both financial and non-financial, as well as past,present, and future performance of companies on ESG dimensions.

Bandar Baru Bangi Selangor

ID : tm3295713928


Network Reliability Assessment with predictive analytics for device communication.

This invention is about intelligently select available networks for better connectivity in a communication device. Often time, a single link communication can cause lost of data once it is unavailable specially when its mobile. Hence, this invention shall provides solution for such issue.

Bandar Baru Bangi Selangor

ID : tm3295813929


My Integrated Multi-Hazard Early Warning System (MIMES)

MIMES is an online multi-hazard system for flood and landslide. It comprised of an engine called i-awas that incorporates a spatial historical database with real time knowledge to provide risk assessments and warnings. This is green product that reduces the effect of geohazards to the community.

Bandar Baru Bangi Selangor

ID : tm3295913930


Mobile Load Demand Analyzer for High Rise Residentials

As the property market boomed a few years back, Selangor with both residential and commercial properties crowning it nations champion in terms of house supply. Citibank (1) and C.H.William etc. (2) report that steady capital appreciation drives the rapid development of high rise units.

Bandar Baru Bangi Selangor

ID : tm3296013931


Mobile Flood Assistant (MO-FA)

MO-FA is an integrated android-based mobile application to assist Malaysia citizens particularly for those who live in flood risk areas with flood information and early warning alert as well as to facilitate evacuation in search and rescue operation.

Bandar Baru Bangi Selangor

ID : tm3296113932


MA-CIO: A general purpose multi-agent collective intelligence optimizer for network routing

This project demonstrates three agents each having a personal intelligence of network routing. While each agent is able to solve difficult network problem individually, the cio enables these agents to collectively communicate their best knowledge to produce optimum solutions to the problem.

Bandar Baru Bangi Selangor

ID : tm3296213933


Local Server with Bitrate Adaptation for Seamless Online Application

This prototypes is to divert network traffic to a few area, i.e local area by allocating local server to manage clients of the local area. Clients will be redirected from public area to the local area during high network traffic. Traffic condition will be monitored bu traffic coordinator.

Bandar Baru Bangi Selangor

ID : tm3296313934


I-CON: Intelligent Communication Network Planning System for transmission line landslide minitoring

A (GIS)- based system incorporated multi criteria decision making for preliminary site suitability test. This is used to determine the most optimum location of the antenna placement and to select the most suitable communication technology to monitor the health of transmission tower.

Bandar Baru Bangi Selangor

ID : tm3296413935


Debt Diagnostic System (DDS)

Debt diagnostic system (DSS) is a novel software package to access the optimal level of debt (reduce or increase) for companies in the oil & gas industry in the nature of complex organizational structure from various dimensions, including business risk, market conditions and management style.

Bandar Baru Bangi Selangor

ID : tm3296513936


Crack Based Bond Strength Model of Externally bonded Plates for Retrofitting of Structures

Please contact the person in charge.

Bandar Baru Bangi Selangor

ID : tm3296613937


Biologically Engineered Bacterial Red Clay Bricks (BioRed-Bricks)



This invention is about the development of biologically engineered bacterial red clay bricks for sustainable masonry construction using the materials of polluted river sand, red clay and bacillus spp. bacteria. The bacteria can induce calcite precipitation to bind and encapsulate heavy metals.

Bandar Baru Bangi Selangor

ID : tm3296713938


Augmented Reality Accounting Learning Simulation (ARALS)

Arals is the new dimension of learning for the students to learn by adapting latest technology of augmented reality. This augmented reality simulation allows educators and students to create layers of digital information on top of the physical world that can be view through mobile devices.

Bandar Baru Bangi Selangor

ID : tm3296813939


An integrated system of a theme park crowd density detector

The Pir motion sensor integrates together with the Raspberry Pi to detect the crowd density level at a specific booth. It uses the wireless connection to send information to the server. The mobile application displays crowd density level. It allows the user to send their emotion status for each booth.

Bandar Baru Bangi Selangor

ID : tm3296913940


An ageing Resistant Bio-Medically Competent Zirconia Ceramics for Hip Implant

The effectiveness of MNO2 and AL203 in enhancing the mechanical properties and retarding the low temperature degradation of Y-TZP was evaluated by pressureless sintering at a sintering temperature of 1250C - 1550C using the standard 2 hours holding time. It was revealed that the additions of MNO2 and AL203 to Y-TZP were beneficial for sintering, mechanical properties and hydrothermal ageing resistance. The optimum level of doping was found to be 0.6WT% MNO2/0.4WT% AL203.

Bandar Baru Bangi Selangor

ID : tm3007411045


A Board And Its Production Method

"The primary object of the present invention is to invent a board which is high strength and low cost. The board shall compose of agricultural wastes which need not be ground into particles and hence eliminate the use of a grinder. Even though without grinding the waste materials, the board can still have high strength due to original material particle size at its maximum and this reduces the use of more expensive material such as binder and hardener.
Another object of the present invention is to invent a board produced from various organic agricultural wastes which are abundant, biodegradable, reusable and inexpensive. As a result, the amount of wastes disposal into the environment can be reduced.
At least one of the preceding objects is met, in whole or in part, by the present invention, in which the embodiment of the present invention describes a method of producing board comprising mixing agricultural wastes of rice husks, rice straws, bagasses, banana leaves and the like with a binder and a hardener and compressing said mixture at a temperature ranging from 100??C to 200??C under pressure of 120 kg/cm2 to 200 kg/cm2 in a time period of 10 minutes to 40 minutes. "

Jejawi Perlis

ID : tm3007511046


Concrete Sludge Brick

Concrete Sludge Brick is made of concrete sludge and small amount of cement. The use of concrete sludge can reduce usage of sand in bricks production and at the same time reduce the production cost. This also can help in protecting the environment in the long run by reducing sand mining activities.
Concrete Sludge Brick produce a comparable compressive strength to normal sand brick but with cheaper production cost. The production cost is approximately 30% lower compared to the normal sand brick. In term of density, Concrete Sludge Brick exhibit lower density compared to normal sand brick thus offer better handling on the site

Jejawi Perlis

ID : tm3007611047


DOMIGREASE : GREASE FROM DOLOMITE

"Dolomite (CaMg(CO3)2) is a pearly, translucent mineral, commonly colorless or white in color. It was named after the French mineralogist and geologist, de Dolomieu D. (1750-1801). Like the others, dolomite can be traced by its physical and chemical.
Dolomite is composed of 52.06% oxygen, 13.03% carbon, 13.18% magnesium, and 21.73% calcium. Iron and manganese carbonates, barium and lead are sometimes present as impurities. In cement industries, dolomite is an industrial waste.
Only a small portion of this industrial waste (dolomite) is used for general purpose such as to cover muddy land. A big fraction of the remaining waste however is not used and creating serious air pollution problems to local community. Hence, the used of the waste to produce greases will be able to overcome numerous problems, including the air pollution problems. Besides that, as a raw material, it is abundant and inexpensive.
The use of dolomite in production of grease can reduce the need for disposal. Besides that, as a raw material, dolomite is abundant and inexpensive. Therefore, it can reduce the grease production cost. Besides that, the grease is expected highly resistant to water and can be use for corrosion protection purpose. "

Jejawi Perlis

ID : tm3007711048


DOMIGREASE :Grease From Dolomite

"Dolomite (CaMg(CO3)2) is a pearly, translucent mineral, commonly colorless or white in color. It was named after the French mineralogist and geologist, de Dolomieu D. (1750-1801). Like the others, dolomite can be traced by its physical and chemical.
Dolomite is composed of 52.06% oxygen, 13.03% carbon, 13.18% magnesium, and 21.73% calcium. Iron and manganese carbonates, barium and lead are sometimes present as impurities. In cement industries, dolomite is an industrial waste.
Only a small portion of this industrial waste (dolomite) is used for general purpose such as to cover muddy land. A big fraction of the remaining waste however is not used and creating serious air pollution problems to local community. Hence, the used of the waste to produce greases will be able to overcome numerous problems, including the air pollution problems. Besides that, as a raw material, it is abundant and inexpensive.
The use of dolomite in production of grease can reduce the need for disposal. Besides that, as a raw material, dolomite is abundant and inexpensive. Therefore, it can reduce the grease production cost. Besides that, the grease is expected highly resistant to water and can be use for corrosion protection purpose. "

Jejawi Perlis

ID : tm3007811049


Easy Pyro-Reactor

Physical activation of biomass in adsorbent production is preferred due to its simplicity and low cost. However, the problems caused by physical activation on biomass are:
1. Complete combustion produced ash and reduce yield of activated carbon (adsorbent)
2. Existing furnace produced low adsorbent quality by heat activation.
3. Usage of gaseous and other auxiliary items caused high cost of adsorbent production (gas, steam)

Jejawi Perlis

ID : tm3007911050


Silica Nano-Tube Immobilized With Cyanex 272 For Environmental Application

In 1991, Iijima first reported the discovery of carbon nano tubes . Since then, some other nanotubes have been developed in succession because of their potential applications for electronic devices, catalysis, separation and optical devices, etc..
Silica nano-tube is prepared using template method followed by immobilized Cyanex 272. Metals recovery from printed circuit is studied. Due to having high surface and nano hollow structured, high efficiency towards metals recovery is achieved and as well as higher amount of Cyanex 272 was found to be trapped.
The immobilized nano tube can be used in diverse application such as selective separation of metals, recovery of high purity metal from its lean sources, removal of toxic metals from industrial waste, preconcentration of metals to improve detection limits and so on. Due to the providing a large surface area, this nano tube shows the high performances

Jejawi Perlis

ID : tm3008011051


Sugarsorb: Physical Treated Sugarcane Bagasse As Adsorbents For Treatment Of DYes Poluted Wastewater

Pigments and dYes represent one of the problematic groups to treat from several industrial wastewaters. They are mainly from dye manufacturing, textile finishing, food colouring, cosmetic, papers, batik and carpet industries. The textile industries, including batik industry in Malaysia is also contributing significantly to the problem.
The use of low cost, recycled waste and ecofriendly adsorbents has been investigated as an alternative method for replacement of currently expensive method for removing dYes from wastewater. In this study, sugarcane bagasse - an agro industry waste were used to remove the dYes from the aqueous solution in a batch reactor. The sulphuric acid treated sugarcane bagasse (SupaSORB) were used to adsorb dYes at a various parameters, namely contact time, adsorbent dosage, initial dYes concentration and pH. The optimum combination all these parameters were determined by using Design of Expert (DoE) software.
As sugarcane bagasse is easily available in the countryside, it has potential to be used for the small scale industries which produced dYes as their effluent, after it was being pretreated with formaldehyde and sulphuric acid.
The data maybe useful for designing and fabrication of an economically cheap treatment process using batch or stirred tank flow reactors for the removal of methyl red from diluted industrial effluent.

Jejawi Perlis

ID : tm3008111052


Trainee Haptic Dental Simulator with Force Feedback

A software system has been developed to help trainee dental doctors to prepare themselves for patient consultation. The environment in a dental room can be limited in space and quiet crowded with dental tools and equipment. Dentists have to be trained to position themselves in this working space such that they can maneuver easily to reach tools and move them around the mouth for teeth inspection. The current form of training using 3D models or real patients can be risky or anatomically monotonous. We propose a training system using 3D graphics to simulate a patients teeth and several dental tools in real-time. This system is currently not available in most dental training hospitals. The main technical feature of the proposed system is the use of an Haptic device to manipulate the tool and generate force feedback to the user. In order to do this accurate 3D models of patients teeth and dental tools are required. It is well known that faithful rendering of haptic force and graphic displays are difficult and often lead to instability. We improve on this by using efficient algorithms and high level libraries of low complexity. This combination is by itself novel. The results obtained are good with a rendering rate of more than to 40 FPS (graphics & force). The proposed system will be beneficial to the young dental community and hospitals. It can be a platform to introduce a new learning paradigm in the medical domain. The system also allows cost saving, time saving and improves quality of consultation. The trainee can repeat the exercises at no cost at all and at their preferred anatomical teeth.

Jejawi Perlis

Displaying 1 - 25 of 43

To Register New Technology and Product Click Here